Table of Contents
Advertisement
Quick Links
SALES NETWORK
SAMSUNG TECHWIN., LTD
•
SAMSUNG OPTO-ELECTRONICS AMERICA, INC.
•
Optics & Digital Imaging Division
Closed Circuit Division
145-3, Sangdaewon 1-Dong, Jungwon-Gu,
40 Seaview Drive, Secaucus N.J
Sungnam, Kyungki-Do, Korea
07094, U.S.A
462-121
TEL : (201) 902-0347
TEL : 82-31-740-8137~41
FAX: (201) 902-9342
FAX: 82-31-740-8145
www.samsungcctv.com
About this manual
Before installing and using the camera, please read this manual carefully. Be sure to keep it handy for later reference.
SAMSUNG CCD CAMERA
P/No. : 6806-0393-01A
Printed in Korea
WDR COLOR CCD CAMERA with
DAY & NIGHT
INSTRUCTION MANUAL
SHC-721N/P/PH
Advertisement
Table of Contents
Related Manuals for Samsung SHC-721N
Summary of Contents for Samsung SHC-721N
- Page 1 Before installing and using the camera, please read this manual carefully. Be sure to keep it handy for later reference. SALES NETWORK SAMSUNG TECHWIN., LTD • SAMSUNG OPTO-ELECTRONICS AMERICA, INC. • Optics & Digital Imaging Division Closed Circuit Division 145-3, Sangdaewon 1-Dong, Jungwon-Gu, 40 Seaview Drive, Secaucus N.J...
- Page 2 The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
- Page 3 The camera needs periodic inspection. Wide Dynamic Range(WDR) Motion Detection Contact an authorized technician for inspection. SV-II DSP chip built-in SAMSUNG TECHWIN The camera transmits an alert signal to the REMOTE jack when it detects motion allows the camera to find the best picture of an object.
-
Page 4: Table Of Contents
Contents Precautions Operating Your Camera Configuration of The Menu Setting Up The Menu Composition • Camera ID • Backlight Name and Function of Each Part • White Balance Front • Motion Detection Side • Lens Selection Bottom • Shutter Speed Control Back •... -
Page 5: Precautions
Precautions Do not install the camera in Do not install or use the camera in an Do not drop the camera or subject Never keep the camera face to extreme temperature conditions. environment where the humidity is high. them to physical shocks. strong light directly. -
Page 6: Composition
Composition Name and Function of Each Section Front 1. WDR Color CCD Camera SHC-721 C-Mount Lens Adapter Used to attach C-mount lens. Tripod Mounting Bracket Screw Hole Used to fix the Tripod mounting bracket on the top of the camera. 2. -
Page 7: Side
Name and Function of Each Section Bottom Side Tripod Mounting Hole Auto Iris Lens Connector Used to install the camera on an optional Used to connect Auto Iris Lens plug. tripod. The tripod must be equipped with the screw specified as shown below. DC/VIDEO Selection Switch Used to choose DC or VIDEO 1/4"-20 UNC (20 THREAD) -
Page 8: Back
Name and Function of Each Section Connection Back LENS The lens is not supplied with this camera. Purchase a lens suitable for your Video Output Jack environment. This camera accepts the auto iris lens and both C-and Remote Jack CS-mount lens. Used to connect an external Used to connect a remote plug. -
Page 9: Installing C/Cs-Mount Lens
Connection 3. Remove the cover from the iris lens plug supplied, and solder the lens Installing C/CS-Mount lens cable to the plug as shown below. Before mounting a lens, please check whether it is a C-mount or CS-mount lens. • Video type : •... -
Page 10: Connecting To Monitor
Connection • Mounting a C-Mount lens Connecting to Monitor 1. Attach the C-Mount lens adapter by turning clockwise. Connect the VIDEO Out jack to the monitor VIDEO In jack. CCD Camera Monitor • As the connecting method varies with the instruments, refer to the manual supplied with the instrument. -
Page 11: Connecting To Power
• ON Backlight (see page 26) Connecting method for AC/DC Power Type • WDR • BLC • OFF Use AC 24V/300mA or DC 12V/500mA power source for SHC-721N/P. White Bal. (see page 27) • W-ATW • S-ATW • H-ATW • L-ATW •... -
Page 12: Setting Up The Menu
Operating Your Camera Setup Setting Up The Menu Select the function using Camera ID Change the status using the UP or DOWN button. Backlight the LEFT or RIGHT button. Use the five Setup Menu buttons on side of the camera. White Bal. - Page 13 Operating Your Camera 3. Press SET button. 5. Select the position at which the camera ID will be located on the screen. Move the cursor to 'Pos' and press SET button. Camera ID Camera ID POS CLR RESET END POS CLR RESET END 4.
-
Page 14: Backlight
Operating Your Camera 4. When completed, press the SET button. Backlight Notes SV-II DSP chip built-in provides intelligent light level control to overcome the severe Backlight conditions. • If you select ESC or manual in ‘shutter’ menu, you can’t use WDR mode. •... -
Page 15: Motion Detection
Operating Your Camera S-ATW(Special Auto Tracking White balance): When color temperature is This feature is useful when you have to monitor several screens simultaneously. 1800~6000K, specially in sodium lamp, select this mode. (EX. sodium lamp, inside the Whenever your camera detects motion of object displaying ‘Motion Detected’ tunnel) with the number counted up on the screen. - Page 16 Operating Your Camera · Move the arrow indicator to 'Top' using the UP or DOWN button and increase · After setting, move the cursor to edge in any direction and then press the button or decrease the value using the LEFT or RIGHT button. Repeat the procedure just one more, let ‘End’...
-
Page 17: Lens Selection
Operating Your Camera Manual: When using manual lens Lens Selection • If you select ‘DC’ mode, you can adjust the desired Brightness. You can set the type of the lens, and control the brightness of the screen. Notes 1. Press the SET button to display the setup menu and move the arrow indicator to 'Lens' using the UP or DOWN button. -
Page 18: Sense Up
Operating Your Camera • You can select speed from ‘1/60’ to ‘1/200,000’sec (NTSC Models), ‘1/50’ Setup to ‘1/200,000’sec (PAL Models). Camera ID • When the shutter speed is increased or decreased using the LEFT or RIGHT Backlight White Bal. W-ATW button, you can find the difference by monitoring the brightness of the screen. -
Page 19: Synchronization Mode
Operating Your Camera 1.Press the SET button to display the setup menu and move the arrow Setup indicator to ‘Sync.’ using the UP or DOWN button. Camera ID Backlight 2. Set ‘Sync.’ to the desired mode using the LEFT or RIGHT button. White Bal. -
Page 20: Special
Operating Your Camera • Move the arrow indicator to area you want to mask. Special • Set ‘On’ using LEFT or RIGHT button. • Press the SET button and then set the area’s bounds with the method like MD1 Set. (see page 29) •... -
Page 21: Using Remote Jack / Md Output
Using Remote Jack / MD Output Troubleshooting If you connect a remote plug to the REMOTE jack on the rear of the camera If you have trouble operating your camera, refer to the following table. If the as shown below, you can access the menu setup mode from a remote place. guidelines do not enable you to solve the problem, contact an authorized technician. -
Page 22: Troubleshooting
Troubleshooting Specifications SHC-721N SHC-721P SHC-721PH Item Problem Solution DC 12V / AC 24V compatible AC 230V / 50Hz Power Source • Have you set ‘Motion Det.’ menu to OFF? Motion Detection 280mA (DC) / 3.8 W (AC) 3.8W Power Consumption function is not active. - Page 23 DECLARATION OF CONFORMITY MEMO Application of Council Directive(s) 89 / 336 / EEC Manufacturer's Name SAMSUNG TECHWIN CO., LTD Manufacturer's Address SAMSUNG TECHWIN CO., LTD 42, SUNGJU-DONG CHANGWON-CITY, KYUNGNAM, KOREA, 641-120 European Representative Name European Representative Address Equipment Type/Environment CCTV Camera...
- Page 24 MEMO MEMO...