Edimax BR-6478AC User Manual page 36

Use the following IP address:
Static IP Address
Subnet Mask
Default Gateway
Address
MAC Address
DNS address
DNS1
DNS2
DNS3
Enable Dual Wan Access:
If your ISP provides a dual-WAN service, then check the box "Enable Dual Wan
Access" and enter the required information.
PPTP Setting:
User ID
Password
PPTP Gateway
Connection ID
MTU
Connection Type
addresses to access the internet, input the MAC address of
your computer here. If your computer is connected to
internet via cable modem, click "Clone Mac address" to
enter the MAC address automatically.
Input the static IP address assigned by your ISP.
Input the subnet mask assigned by your ISP.
Input the default gateway address assigned by your
ISP.
If your ISP only permits computers with certain
MAC addresses to access the internet, input the
MAC address of your computer here. If your
computer is connected to internet via cable modem,
click "Clone Mac address" to enter the MAC address
automatically.
Select "Obtain an IP address automatically" or "Use
the following IP address". If you choose "Use the
following IP address", you will need to complete the
"DNS1 Address", "DNS2 Address" and "DNS3
Address" fields below.
Input the address of DNS1 assigned by your ISP.
Input the address of DNS2 assigned by your ISP.
Input the address of DNS3 assigned by your ISP.
Input the user ID assigned by your ISP.
Input the password assigned by your ISP.
Input the PPTP gateway assigned by your ISP.
Input the connection ID assigned by your ISP. (usually
not use)
Input the MTU (maximum transmission unit) value of
your network connection. The default value is 1392.
Select connection type from:
36