Samsung SPF-87H User Manual page 28

The picture size changes when I rotate it.
The picture looks stretched horizontally or vertically.
Previews are too slow.
Slideshow Transition is displayed when I have saved
only one picture I want in the memory card or when I
pause the Slideshow with multiple pictures saved in the
memory card.
In what order are the pictures, which are saved in the
memory card, displayed?
The Slideshow doesn't start automatically.
I have set <
doesn't switch on automatically.
The pictures I copied from a USB memory or SD card
onto the internal memory have changed in resolution
and file size.
The digital frame is not recognized as a removable disk
when I connect it to a PC with the USB cable.
The picture size changes automatically depending on the rotation angle
(90°, -90°) in order to display the entire image on the screen.
Press [
<
again.
Previews may be slow for large-sized images and multiple images.
The Slideshow Transition will be displayed automatically in order to
protect the panel. This is not an error.
They are arranged according to the file names. The slide show display
order is determined in the order of number, upper-case letter, and
lower-case letter.
Please note that a file name of up to only 25 characters can be
recognized.
Ensure that the <
<
> but the screen Ensure that the current time has been set correctly.
The screen will not switch on automatically if you have turned the
digital frame off by pressing [
been set. The screen switches on automatically only if the power has
been switched off automatically at the Auto Picture Off time.
This product is designed to reduce the file size of high-resolution
pictures to fit the screen's ideal resolution when they are copied onto
the internal memory.
If you want to disable the settings, you can change to the original size
by selecting <
The SPF-87H has 2 USB connectors. You must connect the USB
connector [
as a removable disk if only the auxiliary power (DC 5V) connector is
connected to a PC.
] on the Slideshow screen. Go to <
> and change the setting to <
> is set to <
>-< >.
] when <
>-< >-<
] because the digital frame will not be recognized
>-< >-
> and check
> in
> has
>.