Volvo 262 Owner's Manual page 65

1977 Volvo 262 264 265
No. Lubricating point
1 Hood lock
2 Hood hinges
3 Sun-roof wind deflector
4 Door lock outer sliding surfaces
5 Striker plate
6 Trunk lid hinges
7 Door hinges (upper)
Door hinges + Door stops (lower)
8 Front seat slide rails and latch devices
9 Window regulator
Locking device (accessible after door upholstery panels removed)
10 Key holes
11 Trunk lid lock
pg. 59 Coolant
Check coolant level
The cooling system must be filled with coolant and not leak to operate at maximum efficiency. Check
the coolant level when filling fuel. The level should be between the "Max" and "Min" marks on the
expansion tank. The check should be made with particular thoroughness when the engine is new or the
cooling system has been drained.
Do not remove the filler cap other than for topping-up with coolant. Frequent removal may prevent
coolant circulation between the engine and the expansion tank during engine warming up and cooling.
Top up with coolant
Top up with coolant by filling the expansion tank when level is at the "Min" mark. Use a mixture of 50
file:///K|/ownersdocs/1977/1977_262_264_265/77262264265_03b.htm (5 of 14)12/22/2006 10:08:31 PM
Lubricant
Paraffin wax
Oil
Oil
Paraffin wax
Paraffin wax
Oil
Grease
Grease, oil
Oil
Oil, grease
Silicon grease
Lock oil
Lock oil