Hunter Ceiling fan Quick Manual page 9

Blades www.HunterFan.com
1.888.830.1326
Insert grommets found in the hardware Lightly attach the blade irons to the
bag into the holes in the blades, then
motor with screws found in
secure each blade to a blade iron with the hardware bag, then securely
screws found in the hardware bag. tighten after both screws are attached.
Your blades are shielded with Dust Armor® which
is a nanotechnology coating that repels dust. For
cleaning the fan, use soft brushes or cloths to prevent
scratching. Cleaning agents may damage the finishes.
9
M0028-01 • 10/19/12 • © Hunter Fan Company