NETGEAR R6250 User Manual page 71

can usually determine this information by contacting the publisher of the application or user
groups or news groups.

To enable port triggering:
1. Select Advanced > Advanced Setup > Port Forwarding/Port Triggering.
2. Select the Port Triggering radio button.
3. Clear the Disable Port Triggering check box.
Note: If the Disable Port Triggering check box is selected after you
configure port triggering, port triggering is disabled. However, any
port triggering configuration information you added to the router is
retained even though it is not used.
In the Port Triggering Timeout field, enter a value up to 9999 minutes.
4.
This value controls the inactivity timer for the designated inbound ports. The inbound
ports close when the inactivity time expires. This is required because the router cannot be
sure when the application has terminated.

To add a port triggering service:
1. On the Port Triggering screen, click Add Service.
R6250 Smart WiFi Router
Security
71