Honeywell T7350 Features page 5

PROGRAMMING
The thermostat operates at the Occupied
temperature setting unless the thermostat is
programmed. The program has four settings:
— Occupied heat.
— Occupied cool.
— Not Occupied heat.
— Not Occupied cool.
The thermostat can be set for two Occupied
and two Not Occupied times for each day of the
week (28 independent time settings). The
Temporary Occupied key provides quick
setpoint changes for increased comfort during
Not Occupied periods. The Temporary Not
Occupied key provides energy efficient
operation for extended periods of time.
IMPORTANT
Programming the thermostat with the
keypad requires 24 Vac (turn on
system power). The keyboard lockout
feature must be disabled.
NOTE: Before starting programming, use
Table 2 to organize the program
schedule.
Setting Current Day/Time
This can be done using the keypad.
IMPORTANT
Once you set the day/time once, you
should not need to set it again. As a
result, if you use a PDA to set the day
based upon the calendar (MM/DD/
YYYY), the device will not allow the
keypad to change the day.
5 63-2604