Replacing stop/tail, turn signal, backup and sidemarker lamp bulbs
Your vehicle is equipped with a tail lamp assembly containing integral
multiple light emitting diodes (LED) for the stop/tail, turn signal, backup
and sidemarker functions. If replacement is required, see your authorized
dealer.
Replacing high-mount brake lamp bulbs
Your vehicle is equipped with an LED center high-mount stop lamp. It is
designed to last the life of the vehicle. If replacement is required, it is
recommended that you see your authorized dealer.
Replacing license plate lamp bulbs
1. Make sure the headlamp switch is in the off position.
Install new bulb(s) in reverse order.
2013 MKS (mks)
Owners Guide gf, 2nd Printing
USA (fus)
Maintenance
2. Remove the two screws and lens
from the license plate lamp assembly
.
3. Carefully pull the bulb straight out
from the lamp assembly.
283