For Wireless Connection - TP-Link TL-WPA4220 User Manual

TL-WPA4220/TL-WPA2220
Note:
If the above screen does not prompt, it means that your web-browser has been set to a proxy. Go to
Tools >Internet Options>Connections>LAN Settings, in the screen that appears, cancel the
Using Proxy checkbox, and click OK to finish it.

3.1.2 For Wireless Connection

If your device is connected to the extender via wireless, you can log in the extender by following the
steps below:
1. Launch a web-browser and type in the default domain name
field.
2. Enter admin for the User name and Password (both in lower case letters) in the screen below. Then
click OK or press Enter.
Note:
If the above screen does not prompt, it means that your web-browser has been set to a proxy. Go to
Tools>Internet Options>Connections>LAN Settings, in the screen that appears, cancel the
Using Proxy checkbox, and click OK to finish it.
After a successful login, you can configure and manage the device. There are six main menus on the
leftmost column of the Web-based management page: Status, Network, Wireless, Powerline and
System Tools. Submenus will be available after clicking one of the main menus. On the right of the
Web-based management page lays the detailed explanations and instructions for the corresponding
page.
300Mbps AV500/AV200 WiFi Powerline Extender
Figure 3-4 Log in the Router
Figure 3-5 Login Windows
12
http://tplinkplclogin.net in the address