For Wireless Connection - TP-Link TL-WPA4230P User Manual


Note:
If the above screen does not prompt, it means that your web browser has been set to a proxy. Go to
Tools >Internet Options>Connections>LAN Settings, in the screen that appears, cancel the
Using Proxy checkbox, and click OK to finish it.

3.1.2 For Wireless Connection

If your device is connected to the extender via wireless, you can log in to the extender by following the
steps below:
1. Launch a web browser and type in the default domain name
field.
2. Enter admin for the User name and Password (both in lower case letters) in the screen below. Then
click OK or press Enter.

Note:
If the above screen does not prompt, it means that your web browser has been set to a proxy. Go to
Tools>Internet Options>Connections>LAN Settings, in the screen that appears, cancel the
Using Proxy checkbox, and click OK to finish it.
After a successful login, you can configure and manage the device. There are six main menus on the
leftmost column of the web-based management page: Status, Network, Wireless, Powerline and
System Tools. Submenus will be available after clicking one of the main menus. On the right of the
web-based management page lays the detailed explanations and instructions for the corresponding
page.
TL-WPA4230P AV500 Passthrough Powerline WiFi Extender
Figure 3-4 Log in to the Extender
Figure 3-5 Login Windows
11
http://tplinkplclogin.net in the address