Empty Dirt Container; Cleaning Filters; Maintenance And Care - Bissell 98N4 SERIES User Manual

O
perations

empty dirt container

Empty when dirt reaches the "Full" line
on the container.
1. Turn power OFF. Unplug power
cord from electrical outlet.
2. Slide Lock 'n Seal lever to
"Unlock" position.
3. Grasp dirt cup handle portion and
pull straight out to remove from
vacuum and empty.
4. Place dirt container back in the vacuum
and slide lever to lock position.
note: the dirt container may
be washed in warm water with
mild detergent. Make sure it is
completely dry before replacing.
M
aintenance and care
To maintain suction and cleaning performance,
check and clean filters regularly.
cleaning the inner
& outer circular filter
1. Turn power OFF. Unplug vacuum cord
from electrical outlet.
2. Remove dirt container and filter cup.
Grasp the filter located at the bottom of
the filter cup, lift and pull straight out.
do not pull ciRculaR foaM
filteR out of the filteR cup
While it is still in the VacuuM.
3. Grasp the plastic tab on the top of
the circular foam filters; twist to unlock
and pull out.
8
w w w . b i s s e l l . c o m
2.
Unlock
Position
3.
2.
3.
Full Line
Lock
Position
8 0 0 . 2 3 7 . 7 6 9 1