Network Deployment; General Connection (Without Poe) - Vivotek FE8172V Quick Installation Manual

4

Network Deployment

General Connection (without PoE)

1. Connect RJ45 Ethernet cable to a switch.
2. Connect the power cable from the Network Camera to a power outlet.
3. If you have external devices such as sensors and alarms, make the connection from the general
I/O terminal block.
NOTE:
If DC power is preferred, it should comply with: O/P:
12VDC, 1.5Amin., L.P.S. per IEC 60950-1.
You may also use the diagonal holes on the mounting plate,
marked as A, B, or C, to install the camera to a standard 4 in.
junction box.
3
+3V3
DO
D1
GND
General I/O Terminal Block
Power Cord Socket (Black)
Microphone In (Pink)
Audio Out (Green)
EN - 7
1
+3V3 : Power, 3.3V DC
DO : Digital Output
DI : Digital Input
GND : Ground
2