Defrost Heater And Freezer Thermistor - GE GSS20 Series Technical Service Manual

General electric side-by-side knob control/metal liner refrigerator
Hide thumbs Also See for GSS20 Series:
Table of Contents

Advertisement

4. Remove 4 Phillips screws from the evaporator
cover.
5. Remove the evaporator cover.
6. Disconnect the evaporator fan cable
connectors and the ground wire.
7. Loosen 2 Phillips screws from the evaporator
fan mounting.
2 Connectors
2 Connectors
2 Screws
2 Screws
8. Pull out the fan and remove the light and
defrost heater wiring harness.
9. Remove the fan.
Heater Wiring Harness
Heater Wiring Harness
Heater Wiring Harness

Defrost Heater and Freezer Thermistor

The defrost heater warms the evaporator during
the defrost mode of operation. The freezer
thermistor, located at the bottom left side of the
freezer compartment, senses the temperature in
the freezer.
1. Complete steps 4 and 5 in the previous
procedure.
2. Remove 2 Phillips screws from the defrost
heater.
3. Remove the heater.
GEA00884
4. Remove the freezer thermistor.
GEA00885
– 23 –
2 Screws
2 Screws
Freezer Thermistor
Freezer Thermistor
Freezer Thermistor
GEA00886
GEA00887

Advertisement

Table of Contents
loading

Table of Contents