To erase all messages from the base:
1. Press the PLAY/STOP. The message plays.
. Press and hold the delete button. ERASE ALL MESSAGES? shows in the display.
. Press the YES soft key to confirm the deletion. ALL MESSAGES ERASED shows in the
display.
To erase a message from the handset:
1. Press the MENU soft key on the handset.
. Use the
or
5
6
. Press the SELECT soft key to confirm. MAILBOX 1 (XX) MAILBOX 2 (XX) shows in display,
where XX is the number of the new messages in the mail box.
4. Use the
or
5
6
5. Press the SELECT soft key to confirm. ANSWERER REMOTE ACCESS shows in display.
6. Press the PLAY/STOP on the handset (the button). The message plays.
7. Press the ERASE (the 0 button) to erase the message during message playback.
Leaving a Memo
Base Unit
1. Press and hold the memo/msg fwd button on the base. You must hold the button until
you finish recording the memo.
. Begin speaking after you hear the beep.
. Release the memo/msg fwd button when finished.
NOTE: Message will default record in Mailbox 1.
Cordless Handset
1. Press MENU soft key on the handset.
. Use the
or
5
6
. Press the SELECT soft key to confirm. MAILBOX 1 (XX) MAILBOX 2 (XX) shows in display,
where XX is the number of the new messages in the mail box.
4. Use the
or
5
6
message.
5. Press the SELECT soft key to confirm. ANSWERER REMOTE ACCESS shows in display.
6. Press the MEMO on the handset (the 5 button) to start.
7. Begin speaking when RECORDING MEMO shows in the display.
. Press the END soft key when finished.
NOTE: Make sure the END soft key is pressed after finished recording
memo or it will not be recorded in the mailbox.
4
buttons to scroll to MESSAGES.
buttons to select the desired mailbox.
buttons to scroll to MESSAGES.
buttons to select the desired mailbox which you want to leave the