Saab 9-7x Owner's Manual page 208

Battery Replacement
To change the remote control batteries, do the following:
1. Remove the battery compartment door located on
the bottom of the remote control.
2. Replace the two batteries in the compartment.
Make sure that they are installed correctly, using
the diagram on the inside of the battery
compartment.
3. Close the battery door securely.
If the remote control is to be stored for a long period
of time, remove the batteries and keep them in a cool,
dry place.
Problem
No power.
Disc will not play.
3-86
Recommended Action
The ignition might not be
in ON/RUN or ACC/
ACCESSORY.
The parental control button
might have been turned on.
The power indicator light
flashes.
The system might be off.
The parental control button
might have been turned on.
The power indicator light
will flash.
The system might be in
auxiliary mode.
The disc is upside down
or is not compatible.
Problem
The picture does not fill
the screen. There are
black borders on the
top and bottom or on
both sides or it looks
stretched out.
The disc was ejected,
but it was pulled back
into the DVD player.
In auxiliary mode, the
picture moves or scrolls.
The language in the
audio or on the screen
is wrong.
The remote control
does not work.
Recommended Action
Check the display mode
settings in the display menu.
The disc is being stored in the
DVD player. Press the eject
button again to eject the disc.
Check the auxiliary input
connections at both devices.
Change the Video Format to
PAL or NTSC. See "Stereo
RCA Jacks" previously for
how to change the video
format.
Check the audio or language
selection in the main
DVD menu.
Check to make sure there
is no obstruction between
the remote control and
the transmitter window.
Check the batteries to make
sure they are not dead
or installed incorrectly.
The parental control button
might have been turned on.
The power indicator light
will flash.