Reboot The Router; Connection Statistics - NETGEAR D6200 User Manual

Reboot the Router

You can reboot your WiFi DSL modem router electronically. For information about the Reset
button and the factory setting values, see

To reboot the WiFi DSL modem router:
1. Select Advanced > Administration > Router Status.
2. Click Reboot.

Connection Statistics

You can see how much traffic your Internet connection has occurred.

To show the connection statistics:
1. Select Advanced > Administration > Router Status.
2. Click Show Statistics.
The following information displays:
• System Up Time. The time elapsed since the WiFi DSL modem router was last
restarted.
• Port. The statistics for the WAN (Internet) and LAN (Ethernet) ports. For each port,
the screen displays:
- Status. The link status of the port.
- TxPkts. The number of packets transmitted on this port since reset or manual
clear.
- RxPkts. The number of packets received on this port since reset or manual clear.
- Collisions. The number of collisions on this port since reset or manual clear.
- Tx B/s. The current transmission (outbound) bandwidth used on the WAN and
LAN ports.
- Rx B/s. The current reception (inbound) bandwidth used on the WAN and LAN
ports.
- Up Time. The time elapsed since this port acquired the link.
D6200 WiFi DSL Modem Router
Factory Settings
Administration
97
on page 153.