Call Timer; Auto Standby - GE DECT 00018 User Manual

Call Timer

After you press the TALK/CALL BACK button on the handset, the
built-in call timer shows on the display and counts the length of
time of the call in minutes and seconds.

Auto Standby

If you place the handset in the cradle while the handset
is off the hook (during a call), the call is automatically
disconnected.
Ringer HI/LO/OFF (Shortcut)
There are two ways to set the ringer to HI/LO/OFF. One is the
traditional way as described in the Programming Functions;
Handset Setup; Ringer Volume menus. The other one is this
short cut to ringer menu.
1. Make sure the phone is OFF (not in TALK mode).
. Press the #pause/ringer button to display SET RINGER 1HI
2LOW 3OFF.
. Use the touch tone pad on the handset to select 1,  or
, or use the caller ID-volume (6 or 5) button to scroll to
your selection. HI is the default setting.
. Press #pause/ringer button again to save and display the
new selection for a few seconds.
6