Delete A Vpn Tunnel; Auto Policy Example - NETGEAR N300 User Manual

Delete a VPN Tunnel


To delete VPN tunnel:
1. Select Advanced > Advanced - VPN > VPN Policies.
2. Select the radio button for the VPN tunnel.
3. Click Delete.

Auto Policy Example

You need to configure matching VPN settings on both VPN endpoints. The outbound VPN
settings on one end have to match to the inbound VPN settings on other end, and vice versa
Auto policy creates a typical automated Internet Key Exchange (IKE) setup. Auto Policy uses
the IKE protocol to define the authentication scheme and automatically generate the
encryption keys.
Gateway A
Figure 15. Example of an Auto policy for a gateway-to-gateway tunnel
N300 Wireless ADSL2+ Modem Router DGN2200v4
IP: 192.168.0.1
VPN Tunnel
14.15.16.17
Virtual Private Networking
IP:192.168.3.1
22.23.24.25
112
Gateway B