Trouble Conditions - First Alert FA2000C User Manual

TROUBLE CONDITIONS

General Your system monitors each of your protection zones and various aspects of
system operation for problems such as wire breaks, loss of AC power, faulted
telephone lines, etc., which compromise proper alarm signaling operation. Your
system provides the following indications when one of these problems is
detected.
CALL YOUR INSTALLER IMMEDIATELY FOR SERVICE, WHEN ANY OF
THESE INDICATIONS APPEAR FOR A CONDITION THAT CANNOT BE
CORRECTED BY YOU!
¥ The control's buzzer and keypad buzzer both produce a rapid pulsing sound.
¥ The controls AC POWER LED turns off and the keypad LCD displays "AC
LOSS" (Alpha) or "NO AC" (Fixed-Word) when AC power is low or not present.
¥ The control's BATTERY TROUBLE LED lights and the keypad LCD displays
"SYSTEM LO BAT" (Alpha) or "BAT" (Fixed-Word) when your system's back-up
battery is low or disconnected.
¥ The controls COMM FAIL LED lights and the keypad LCD displays "COMM
FAILURE" (Alpha) or "FC" (Fixed-Word) when attempts to send a message to
the central station have failed.
¥ The keypad LCD (Fixed-Word) displays "CHECK" accompanied by a protection
zone number (1Ð5) or system zone number (6Ð12) when there is a zone or
system related problem. Alpha keypads also display a description of the zone.
The control's LINE FAULT LED lights if the problem is with the telephone lines.
CHECK 03 FRONT
CHECK 01
UPSTAIRS STORAGE
WAREHOUSE SMOKE
ALPHA
Ð19Ð
03
AWAY SUPV NO AC
PHONE TEST
BYPASS
NOT READY
STAY
ALARM
CHIME BAT
FIRE
CHECK INSTANT TAMPER
FIXED-WORD