Supervisory Conditions; General; Silencing And Resetting A Supervisory Indication - First Alert FA2000C User Manual

SUPERVISORY CONDITIONS

General

If your building has a fire sprinkler system, your installer may have installed a
sensor which monitors the sprinkler system (e.g., to determine whether the main
water gate valve is open or that there is adequate water pressure, etc.). Your
system provides the following indications when a supervisory condition is
detected.
CALL YOUR INSTALLER IMMEDIATELY FOR SERVICE WHEN A
SUPERVISORY INDICATION APPEARS!
¥ The control's buzzer and the keypad buzzer both produce a rapid on/off pulsing
sound.
¥ The keypad LCD (Fixed-Word) displays the word "SUPV" and the number of
the zone with the supervisory condition. Alpha keypads also display a
description of the zone.
¥ A supervisory message is sent to the central station.
To silence the control and keypad
Silencing
buzzers:
and Resetting
Press the control's SILENCE/RESET
a Supervisory
button or enter your User Code, + the
Indication
The keypad's LCD will display the
number of the zone having the
supervisory condition as a Memory
indication.
SUPV 04
SPRINKLER VALVE
ALPHA
OFF key
Ð18Ð
SUPV NO AC
04 AWAY
PHONE TEST
BYPASS
NOT READY
STAY
ALARM
CHIME BAT
FIRE
CHECK INSTANT TAMPER
FIXED-WORD
To reset the keypad supervisory
display: First have the cause of the
indication corrected, and then:
Press the SILENCE/RESET button again
or re-enter your User Code, followed by
the OFF key.