Table of Contents
Advertisement
Headlamp bulb replacement
Installing the headlamp bulb
With the flat side of the bulb's plastic base facing upward,
1.
insert the glass end of the bulb into the socket. You may
need to turn the bulb left or right to line up the grooves in
the plastic base with the tabs in the socket. When the
grooves are aligned, push the bulb into the socket until the
plastic base contacts the rear of the socket. Do not touch the
glass with your fingers.
Slip the retaining ring over the plastic base until it contacts
2.
the rear of the socket. Lock the ring into the socket by
rotating it until you feel a "stop."
Push the electrical connector into the rear of the plastic base
3.
until it snaps, locking it into place.
322
Advertisement
Table of Contents
