Advertisement
QuickSpecs
Technical Specifications
HP 1410-16 Switch (J9662A)
Ports
Physical characteristics
Memory and processor
Mounting
Performance
Environment
Electrical characteristics Frequency
3 Yr 6 hr Call-to-Repair Onsite (UW386E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR845E)
Refer to the HP website at:
descriptions and product numbers. For details about services and response times in your area, please
contact your local HP sales office.
16 RJ-45 autosensing 10/100 ports; Duplex: half or full (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX)
Supports a maximum of 16 autosensing 10/100 ports
Dimensions
Weight
16 Kb EEPROM; packet buffer size: 2 Mb
Mounts in an EIA standard 19-inch telco rack (hardware included); wall, desktop and under-table mounting
100 Mb Latency
Throughput
Switching capacity
MAC address table size
Operating temperature
Operating relative
humidity
Nonoperating/Storage
temperature
Nonoperating/Storage
relative humidity
Altitude
Acoustic
Maximum heat
dissipation
Voltage
DC voltage
Current
Maximum power rating
Notes
DA - 13674 Worldwide — Version 12 — December 16, 2013
www.hp.com/networking/services
8.21(w) x 4.21(d) x 1.73(h) in (20.85 x 10.69 x 4.39 cm) (1U height)
1.43 lb (0.65 kg)
< 10.6 µs (LIFO 64-byte packets)
2.3 Mpps (64-byte packets)
3.2 Gb/s
8192 entries
32°F to 104°F (0°C to 40°C)
15% to 95% @ 104°F (40°C), noncondensing
-40°F to 158°F (-40°C to 70°C)
15% to 90% @ 149°F (65°C), noncondensing
up to 10,000 ft. (3 km)
Power: 0 dB No fan
50/60 Hz
13 BTU/hr (13.72 kJ/hr)
100 - 240 VAC
12 V
0.3 A
3.6 W
Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure with
fully loaded PoE (if equipped), 100% traffic, all ports plugged
in, and all modules populated.
The exact input voltage and frequency rating are determined by the specific
power adaptor part number ordered. Please select the correct power adaptor
HP 1410 Switch series
for details on the service-level
Page 14
Advertisement
