HP ProLiant DL560 Specification page 6

QuickSpecs
Standard Features
Interfaces
Industry Standard
Compliance
Server Power Cords
Power Specifications
Serial
Video
FlexibleLOM Network Ports Some models come standard with 4 x 1GB ports while others come with 2 x
HP iLO Remote
Management Network Port
Micro SD slot
USB 2.0 Ports
ACPI 2.0b Compliant
PCIe 3.0 Compliant
PXE Support
WOL Support
Microsoft® Logo certifications
USB 2.0 Compliant
All Pre-configured servers ship with a high voltage server-to-PDU power cord.
NOTE: HP ProLiant DL servers no longer ship standard with a 12-foot NEMA 5-15P to C13 power cord that
connects to 110V US wall outlets in a home or office. ProLiant DL servers are primarily connected to power
distribution units (PDUs) in data center racks and now ship standard with a PDU 6-foot C-14 to C13 power
cord (A0K02A). If a user wishes to power a ProLiant DL server using a 110V receptacle (NEMA-15), the 6-
foot NEMA 5-15 to C13 power cord must be ordered separately (AF556A). See Power Cords section for
Worldwide Power Cord options.
To review typical system power ratings use the HP Power Advisor which is available via the online tool
located at URL: www.hp.com/go/proliant-energy-efficient
NOTE: Power Specification and Technical Content for supported power supplies can be found at:
http://h18000.www1.hp.com/products/quickspecs/14209_div/14209_div.html
DA - 14395 Worldwide — Version 17 — December 13, 2013
HP ProLiant DL560 Generation8 (Gen8)
1
2 (1 front, 1 back) not active simultaneously
10GB ports (See HP Networking section below for more details and options).
1 Gb Dedicated
1 Internal Secure
NOTE: The SD slot is not a hot-pluggable device. Customers should not
attempt to plug an SD card into the SD slot while the server is powered.
7 total: 2 front, 4 back, 1 internal
or www.hp.com/go/hppoweradvisor.
Page 6