Technical Specifications - HP ProLiant BL620c Specification

Generation 7 server blade
Table of Contents

Advertisement

QuickSpecs

Technical Specifications

System Unit
Dimensions
(H x W x D)
Weight
(approximate)
Power Specifications
System Inlet
Temperature
Relative Humidity
(non-condensing)
Altitude
DA - 13747 Worldwide — Version 35 — December 13, 2013
HP ProLiant BL620c Generation 7 (G7) Server Blade
Full height, single-wide server blade:
14.46 x 2.19 x 20.09 in (36.73 x 5.49 x 51.03 cm)
Maximum
(all hard drives, DIMMs,
mezzanine cards, and
processors installed)
Minimum
(two hard drives, four
DIMMs, no mezzanine
cards, and two processors
installed)
For power specifications including input requirements, BTU rating, and power
supply output, please see the HP BladeSystem c-Class Enclosures QuickSpecs
located at:
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_div/
12790_div.html
(Worldwide)
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_div/
12810_div.html
(Worldwide)
To review typical system power ratings use the HP BladeSystem Power Sizer
available at: http://www.hp.com/go/bladesystem/powercalculator.
Operating
Non-Operating
Operating
Non-Operating
Operating
Non-operating
24.24lbs (11.00kg)
17.9lbs (8.12kg)
10° to 35°C (50° to 95°F) at sea level with an
altitude derating of 1.0°C per every 305 m (1.8°F
per every 1000 ft) above sea level to a maximum
of 3050 m (10,000 ft), no direct sustained
sunlight. Maximum rate of change is 10°C/hr
(18°F/hr). The upper limit may be limited by the
type and number of options installed. System
performance may be reduced if operating with a
fan fault or above 30°C (86°F).
-30° to 60°C (-22° to 140°F), maximum rate of
change is 20°C/hr (36°F/hr).
10 to 85% relative humidity (Rh), 28°C (82.4°F)
maximum wet bulb temperature, non-
condensing.
10 to 95% relative humidity (Rh), 38.7°C (101.7°F)
maximum wet bulb temperature, non-
condensing.
3050 m (10,000 ft). This value may be limited by
the type and number of options installed.
Maximum allowable altitude change rate is 457
m/min (1500 ft/min).
9144 m (30,000 ft). Maximum allowable altitude
change rate is 457 m/min (1500 ft/min).
Page 32

Advertisement

Table of Contents
loading

This manual is also suitable for:

Proliant bl620c generation 7Proliant bl620c g7

Table of Contents