Pre-Configured Models - HP ProLiant BL620c Specification

QuickSpecs

Pre-Configured Models

NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory
Integrated Models" section.
NOTE: Not all models are available in all regions. Check with your local country HP offices for availability.
HP ProLiant BL620c G7 E7-
2860 1P 32GB-R Server
643763-B21
HP ProLiant BL620c G7 E7-
2850 1P 32GB-R Server
643764-B21
HP ProLiant BL620c G7 E7-
2830 1P 32GB-R Server
643765-B21
Processor(s)
One of the following
depending on model
Cache Memory
Memory
Network Controllers
Storage Controller
Hard Drives
Internal Storage
Optical Drive
Form Factor
DA - 13747 Worldwide — Version 35 — December 13, 2013
HP ProLiant BL620c Generation 7 (G7) Server Blade
(1) Intel® Xeon® E7-2860 (2.26GHz/10-core/24MB, 6.40GT/s QPI, 130W)
Processor
(1) Intel® Xeon® E7-2850 (2.0GHz/10-core/24MB, 6.40GT/s QPI, 130W)
Processor
(1) Intel® Xeon® E7-2830 (2.13GHz/8-core/24MB, 6.40GT/s QPI, 105W)
Processor
24MB L3 cache
32GB (4 x 8GB) DDR3-1333 RDIMMs (operating up to 1066MHz)
Four (4) integrated HP NC553i 10Gb FlexFabric adapter ports supporting
10Gb/1Gb autosensing Ethernet, FCoE, Flex-10, TCP/IP offload engine,
hardware-based accelerated iSCSI, and iSCSI boot
One (1) 10/100 network adapter port dedicated to iLO 3 Management
Integrated SAS version 2.0 (6Gb) HP Smart Array P410i Controller with RAID 0
and 1
NOTE: The P410i is configured with no cache allowing the end user to select
the desired cache option (if cache is desired in the first place).
NOTE: RAID 0 and 1 are supported on the P410i without the need for a cache
option.
Two (2) cache slots for BBWC and/or FBWC battery options.
NOTE: The server supports up to a combined total of two (2) battery cache
options for the P410i and/or optional Smart Array RAID controllers.
No drives included; supports up to two (2) hot-plug SFF SAS/SATA/SSD drives
SAS: 2.4TB; SATA: 2.0TB; SAS SSD: 1.6TB; SATA SSD: 800GB
None
Up to 4 blades in the HP BladeSystem c3000 enclosure
Up to 8 blades in the HP BladeSystem c7000 enclosure
Page 15