Technical Specifications - HP 7500 Quickspecs

QuickSpecs

Technical Specifications

HP 7510 Switch Chassis (JD238B)
Included accessories
Ports
Power supplies
Fan tray
Physical characteristics
Memory and processor
Mounting
Performance
Reliability
Environment
Electrical characteristics Description
Safety
Emissions
1 HP 7510 Spare Fan Assembly (JD216A)
2 switch fabric slots
10 I/O module slots
Supports a maximum of 84 10-GbE ports or 480 autosensing 10/100/1000 ports or 480 SFP ports, or a
combination
2 power-supply slots
1 minimum power-supply required (ordered separately)
includes: 1 x JD216A
1 fan tray slot
Dimensions
Weight
Fabric
I/O Module
Mounts in an EIA-standard 19 in. rack or other equipment cabinet (hardware included); horizontal surface
mounting only
Throughput
Routing/Switching
capacity
Routing table size
MAC address table size
Availability
Operating temperature
Operating relative
humidity
Nonoperating/Storage
temperature
Nonoperating/Storage
relative humidity
Acoustic
Voltage
DC Voltage
Current
Power output
Frequency
Notes
UL 60950-1; IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; EN 60950-1/A11
VCCI Class A
DA - 13805 North America — Version 29 — December 9, 2013
17.17(w) x 16.54(d) x 27.87(h) in (43.6 x 42.0 x 70.8 cm) (16U height)
211 lb (95.71 kg), Fully loaded chassis, two fabrics, two power supplies, and a
full complement of typical I/O modules
MIPS64 @ 600 MHz, 64 MB flash, 512 MB RAM
MIPS64 @ 400 MHz, 512 MB RAM
714 million pps
1152 Gbps
256000 entries (IPv4), 8000 entries (IPv6)
512000 entries
99.999%
32°F to 113°F (0°C to 45°C)
10% to 95%, non-condensing
-40°F to 158°F (-40°C to 70°C)
5% to 95%, non-condensing
Low-speed fan: 53.5 dB, High-speed fan: 56.7 dB
100-120 / 200-240 VAC
-48 V / -60 V
16 / 50 A
1400 W
50 / 60 Hz
Based on a common power supply of 1400 W (AC/DC)
HP 7500 Switch Series
Page 30