Remote Web Console - HP XP P9500 Owner's Manual

The HP XP P9000 SNMP Agent User Guide describes the SNMP API interface for the P9500
disk array and provides instructions for configuring and performing SNMP operations.
The HP XP P9000 Provisioning for Open Systems User Guide and HP XP P9000 Volume
Shredder for Open and Mainframe Systems User Guide provide instructions for configuring
multiple custom volumes (logical units) under single LDEVs on the P9500 disk array. The HP
XP P9000 Provisioning for Open Systems User Guide also provides instructions for configuring
size-expanded logical units by concatenating multiple logical units to form individual large
logical units.

Remote Web Console

Remote Web Console is installed on a PC, laptop, or workstation. It communicates via a LAN to
the SVP in the P9500 disk array. The SVP obtains disk array configuration and status information
and sends user initiated commands to the disk array. The Remote Web Console GUI displays
detailed disk array information and allows users to configure and perform storage operations on
the system.
Remote Web Console is provided as a Java applet program that can be executed on any machine
that supports a Java Virtual Machine (JVM). A PC hosting the Remote Web Console software is
called a remote console. Each time a remote console accesses and logs into the SVP of the desired
disk array, the Remote Web Console applet is downloaded from the SVP to the remote console.
Figure 10 (page 53)
For further information about Remote Web Console, see the HP XP P9000 Remote Web Console
User Guide.
Figure 10 Remote Web Console and SVP configuration
illustrates remote console and SVP configuration for Remote Web Console.
Remote Web Console 53