HP XP P9500 Owner's Manual page 32

Table 1 1 System option modes (continued)
Mode Category
531 Open and
Mainframe
548 Continuous Access
Synchronous Z,
Continuous Access
Journal Z, or
ShadowImage for
Mainframe from
BCM
556 Open
561 Business Copy,
External Storage
573 Continuous Access
Synchronous Z
Business Copy Z
32 Functional and operational characteristics
Description
Manager or Storage Navigator may show earlier time than the
time showed when the pair was in the Duplex state.
When PIN data is generated, the SIM currently stored in SVP is
reported to the host.
Mode 531 = ON:
The SIM for PIN data generation is stored in SVP and reported
to the host.
Mode 531 = OFF:
The SIM for PIN data generation is stored in SVP only, not
reported to the host, the same as the current specification.
This option prevents pair operations of TCz, URz, or SIz via
Command Device online.
Mode 548 = ON:
Pair operations of TC for z/OS, UR for z/OS, or SI for z/OS via
online Command Device are not available. SSB=0x64fb is output.
Mode 548 = OFF:
Pair operations of TC for z/OS, UR for z/OS, or SI for z/OS via
online Command Device are available. SIM is output.
Note:
1. When Command Device is used online, if a script containing
an operation via Command Device has been executed, the
script may stop if this option is set to ON. As described in the
BCM user's guide, the script must be performed with Command
Device offline.
2. This option is applied to operations from BCM that is operated
on MVS.
Prevents an error code from being set in the 8 - 1 1th bytes in the
standard 16-byte sense byte.
Mode 556 = ON:
An error code is not set in the 8 - 1 1th bytes in the standard
16-byte sense byte.
Mode 556 = OFF (default):
An error code is set in the 8 - 1 1th bytes in the standard 16-byte
sense byte.
Allows Quick Restore for external volumes with different Cache
Mode settings.
Mode 561 = ON:
Quick Restore for external volumes with different Cache Mode
settings is prevented.
Mode 561 = OFF (default):
Quick Restore for external volumes with different Cache Mode
settings is allowed.
For the DKU emulation type 2105/2107, specifying the
CASCADE option for the ICKDSF ESTPAIR command is allowed.
Mode 573 = ON:
The ESTPAIR CASCADE option is allowed.
Mode 573 = OFF (default):
The ESTPAIR CASCADE option is not allowed. (When specified,
the option is rejected.)
Default MCU/RCU
OFF MCU/RCU
OFF MCU/RCU
OFF MCU/RCU
OFF MCU/RCU
The unit where
Cnt Ac-S Z and
BC Z in a
cascading
configuration use
the same volume