Clarion VX709A Owner's Manual & Installation Manual page 67

Display
ERROR 5 (iPod)
BUS ERROR
DEVICE ERROR
DRM
NOT SUPPORT
If an error display other than the ones described above appears, press the Reset button. If the problem
persists, turn off the power and consult your store of purchase.
• When the Reset button is pressed, frequencies of radio stations, etc. stored in memory are cleared.
66
VX709A
Cause
The connected iPod is not
recognized.
Over-current or data error
is detected.
The device is connected
via the USB Hub.
WMA files protected by
DRM are played.
Files not supported by this
unit are played.
Measure
Disconnect the iPod, and reconnect it again. If the
iPod is still not recognized, try replacing with a
different iPod.
If the iPod is frozen, disconnect it, reset it, and
reconnect it again.
Turn off the ignition switch, disconnect the device,
restart the engine and reconnect it again. If the
device is still not recognized, try replacing with a
different device.
Disconnect the device, and reconnect directly to
the USB connector of this unit without using the
USB Hub.
Perform the operation such as skipping a file.
(Repeat and random playback mode may be
canceled.)