HP 255 Specification page 21

QuickSpecs
Technical Specifications
MATERIAL USAGE
This product does not contain any of the following substances in excess of regulatory limits (for reference of these limits please refer
to the HP General Specification of the Environment
(http://www.hp.com/hpinfo/globalcitizenship/environment/supplychain/gen_specifications.html):
Asbestos
Certain Azo Colorants
Equipment (WEEE) Directive - 2002/96/EC.
This product is in compliance with California Proposition 65 (State of
California; Safe Drinking Water and Toxic Enforcement Act of 1986).
This product is in compliance with the IEEE 1680 (EPEAT) standard at the Silver
level, see
Plastics parts weighing over 25 grams used in the product are marked per ISO
11469 and ISO1043.
This product contains 0% post-consumer recycled plastic (by wt.)
This product is greater than 97.10% recycle-able when properly disposed of at
end of life.
Packaging Materials
External:
Internal:
The PAPER/Corrugated packing material is made from 70% recycled
content
The PLASTIC/Polyethylene low density packing materials contains at
least 50% recycled content
HP follows these guidelines to decrease the environmental impact of product
packaging:
Eliminate the use of heavy metals such as lead, chromium, mercury and
cadmium in packaging materials.
Eliminate the use of ozone-depleting substances (ODS) in packaging
materials.
Design packaging materials for ease of disassembly.
Maximize the use of post-consumer recycled content materials in
packaging materials.
Use readily recyclable packaging materials such as paper and
corrugated materials.
Reduce size and weight of packages to improve transportation fuel
efficiency.
Plastic packaging materials are marked according to ISO 11469 and DIN
6120 standards.
DA - 14582 Worldwide — Version 5 — August 27, 2013
www.epeat.net
PAPER/Corrugated 470.8 g
PLASTIC/Polyethylene low density 46.3 g
HP 255 Notebook PC
Page 21