Cruise Control - Subaru 2012 Outback Quick Reference Manual

Cruise Control

light on the instrument panel will turn on.
To deactivate cruise control, press the
the brake pedal or press the
a manual transmission, you can
push in the clutch pedal.
Increase speed
vehicle reaches the desired speed
and release. To increase speed
using the accelerator pedal, press
the pedal until you reach the
desired speed. Push down the
side to set the speed.
939416_12a_Subaru_Outback_QRG_082211b.indd 21
canceling, push the switch
your vehicle reaches the desired
speed. Push the switch to the
the accelerator pedal. Your vehicle
will maintain the desired speed.
Decrease speed
vehicle slows to the desired speed
and release. To decrease the speed
using the brake pedal, press the
pedal to release cruise control
temporarily. When the speed
decreases to the desired speed,
21 21
8/22/11 4:33 PM