Assembly; Operations; Power Switch - Bissell 53Y8 User Manual

Assembly

No tools are required for assembly; simply insert
foot into body of unit until you hear a click.
charging
before charging make sure unit is in the OFF
position.
1. insert the charging adapter plug into the
charging port on the back of the unit or the
bottom of the charging base.
2. Plug the adapter into the wall outlet. if using
the charging base, place unit onto base. The
red indicator light will illuminate and remain on
when plugged into wall outlet. Charge the unit
completely for 24 hours prior to first use.
notE: the adapter may become warm during
charging – this is normal.
3. When the unit is fully discharged,
approximately 16 hours of charging is required
for the battery to regain full capacity.

Operations

power switch

The power switch is located on the top
of the handle. settings include:
(O) = OFF
(i) = suction ON
(bRUsH) = suction and brush ON
Using your stick vacuum
1. Push power switch on to desired setting.
2. easily clean hard floors, low pile carpet,
and area rugs.
3. When finished cleaning, turn power switch
to OFF (O) position.
2-way folding handle
This feature is great for clean ing under couches,
beds and other hard to reach areas.
1. To release, push button located under power
switch to bend handle forward for cleaning
under furniture.
2. For space saving storage, push button to
bend handle backward.
Do not plug in your vacuum cleaner until
you are familiar with all instructions and
operating procedures.
1.
1.
www.bissell.com
WaRnInG
2-Way Folding
Handle Release
800.237.7691
5