Ptional Headset To The Handset; Belt Clip And Optional Headset; Display Messages - GE 21029 User Manual

Belt clip and Optional Headset

Connecting the Belt Clip
1. To attach the belt clip, insert the sides of the belt clip into
the slots on each side of the handset.
2. Snap the ends of the belt clip into place.
Connecting an Optional Headset to the
Handset
Each handset can be used with an optional headset for hands
free operation.
1. Connect the headset to the headset jack
on the side of the handset The handset
receiver and microphone are disabled
when the headset is connected.
2. Adjust the headset to rest comfortably on
top of your head and over your ear. Move
the microphone to approximately two to
three inches from your mouth.
3. Press the TALK/END/call back button to
answer a call or make calls using the headset.
4. To return to normal operation, unplug the headset from the jack.

Display Messages

The following messages shows the status of the phone, provides Caller ID
information, or helps you set up and use your phone.
INCOMPLETE DATA
HANDSET NAME
CID information is interrupted during
transmission or the phone line is excessively
noisy.
Prompt telling you to enter the user name for the
registered handset.
Slot for belt clip
Belt clip
Headset jack
Headset Plug
47