Remote Access; Cordless Handset; Answering System Indicator; Screening Calls From The Handset - GE 21029 User Manual

4. Press del button to erase all of the current CID records.The display shows
DELETED followed by NO CALLS.
NOTE: Press the *exit key on the handset to return to the standby mode.

Remote Access

You may access the answering system with the cordless handset or from
any tone-dial compatible telephone.

Cordless Handset

Use the corresponding handset keys just like you would use the base
buttons (see "Answering System Setup").The button functions are located
on the handset above each number key. For example, to play messages:
• Press the FLASH/answerer button.The display shows ANSWERER
REMOTE ACCESS.
• Press 2 (PLAY/STOP) followed by the mailbox number to play the
message in that mailbox. For example, press 2 and 3 to play the message
in mailbox 3.
• When you are finished listening to your messages, press the FLASH/
answerer button again.

Answering System Indicator

The answering system is active when the indicator on the base is on.

Screening Calls from the Handset

Use the handset to screen calls even when you can't hear the answering
system.
When the answering system picks up:
1. Press the FLASH/answerer button to access the answering system.
2. Listen as the caller leaves a message.
3. Press theTALK/END/call back or SPKR buttons to speak to the person or
press the FLASH/answerer button to stop screening the call.
44