Table of Contents
Advertisement
To set Anonymous call rejection using phone interface:
1) Press MENU/BACK[2. Features [ 4. Anonym Call to enter the configuration
page.
2) Press the UP or DOWN navigation keys to enter the Rejection page
(if the active user type is admin or var , press MENU/BACK [ 2. FEATURES [ 6.
ANONYM CALL ).
3) Press RIGHT or LEFT navigation keys to enable/disable Anonymous Call Rejection
function.
4) If your user type is admin and you would like to use your service provider to
get this service , please press the DOWN key and enter the Rejection On Code and
Rejection Off Code. Whenever you enable/disable the Rejection option on your IP
phone, it will automatically send these codes to the server.
5) Press OK to save your changes, or MENU to cancel.
Note: To manage Anonymous Calls and Rejection codes you need to have admin
or var rights. Check active User Type before attempting to configure using phone
interface.
Dial Plan
A dial plan establishes the expected number and pattern of digits for a telephone
number. This includes country codes, access codes, area codes and all combina-
tions of dialed digits.
Dial plans can be used for least cost routing, dialing convenience or to prevent
users from calling specific numbers or groups of numbers.
Dial plans require admin or var privilege.
The entire dial plan is enclosed in brackets (). Each dial plan is pipe seperated (|).
The dial plan can include the digits 0 to 9, * and #. "x" represents any digit from 0
to 9. Repetition (i.e. x.) represents any digit (x) repeated 0 or more times. Big letter
T means to dial the numbers immediately after the dial plan sequence is matched
(e.g. 1234T). Square brackets [] are for digit matching. For example, [578] xxx will
match any four digit sequence starting with either 5, 7 or 8. [5-8]xxx will match
any four digit sequence starting with 5, 6, 7 or 8.
27
26
Advertisement
Table of Contents
