Anonymous Call - RCA IP110 Operation Manual

Anonymous call

Anonymous call, also known as Caller ID restriction, allows a user to request the
network to hide their identity when they are performing outgoing calls.
The IP110 supports Permanent Caller ID restriction, meaning that while enabled
all calls will request to be anonymous and the user will need to disable the feature
if they want their identity to be transmitted. This service can be performed locally
or by sending an activation code to the network, depending on your network.
Additionally the IP110 allows users to automatically reject anonymous incoming
calls.
These services can be managed through both phone and Web interfaces.
To set Anonymous call via phone interface:
1) Press MENU/BACK[2. FEATURES [4. ANONYM CALL to enter the configura-
tion page. ( if the active user type is admin or var , press MENU/BACK [
2. FEATURES[6. ANONYM CALL )
2) Use LEFT or RIGHT navigation keys to select the account to be anonymous.
3) Press DOWN navigation key to display "Block CID", then press LEFT or RIGHT
navigation keys to enable/disable the anonymous call function.
4) If you want to perform this function locally, press OK to save your changes.
5) If your user type is admin and you would like to activate this function in your
service provider please press DOWN key and enter the Anonym On Code and Ano-
nym Off Code. Whenever you enable/disable the anonymous call function on your
phone, it will automatically send these codes to the server.
6) Press OK to save your changes, or MENU to cancel.
25