Resetting The Maintenance Counter - Lexmark C746x User Manual

Maintaining the printer

Resetting the maintenance counter

Reset the maintenance counter after installing a new photoconductor.
When a "replace" or "low" message appears
Follow this procedure when a photoconductor is replaced and 84 Replace [color] photoconductor, 84
[Color] photoconductor nearly low, or 84 [Color] photoconductor low appears:
1
From the printer control panel, navigate to:
> Status/Supplies >
or
> Status/Supplies > Supply Replaced
2
When Replaced [color] photoconductor appears, select Yes. For non‑touch‑screen printer models,
press to confirm.
Notes:
•
Make sure to replace all four photoconductors at the same time.
•
When Ready appears, the counter is reset.
When a "replace" or "low" message does not appear
Follow this procedure when a photoconductor is replaced and a "replace" or "low" message does not appear:
1
From the printer control panel, navigate to:
> Settings >
or
> Supplies Menu > Replace Supply
2
Select the button that indicates the supply item you replaced.
• All
•
Cyan Photoconductor
•
Magenta Photoconductor
•
Yellow Photoconductor
•
Black Photoconductor
3
When [Color] photoconductor replaced appears, select Yes. For non‑touch screen printer models,
press to confirm.
4
Press to return to the home screen.
> Supply Replaced >
> Supplies Menu > > Replace Supply >
198