General features
2
Data capacities of 1.5TB/2TB
Spindle speeds of 7200 RPM
Fluid Dynamic Bearing motor
Dual Stage Actuator
Serial ATA interface
Sector format of 512 bytes/sector
Closed-loop actuator servo
Load/Unload mechanism, non head disk contact start/stop
Automatic Actuator lock
Interleave factor 1:1
Sector Buffer size of 64MB
(Upper 7631.5 KB is used for firmware, this is typical value, it depends on firmware revision)
Ring buffer implementation
Write Cache
Native command queuing support
Automatic Error Recovery procedures for read and write commands
Self Diagnostics on Power on and resident diagnostics
Serial ATA Data Transfer
CHS and LBA mode
Power saving modes/Low RPM idle mode (APM)
S.M.A.R.T. (Self Monitoring and Analysis Reporting Technology)
Support security feature
48 bit addressing feature
Adaptive zone formatting
SATA-2.60 compliant
6Gbps
15