Inbound Call Control - ATCOM APBX IP08 User Manual

APBX IP08 User Manual
Caller ID
Define the Caller ID number to be matched on incoming calls. Leave this field blank to match any or no CID info.
Special characters described in chapter 5.2 can be used here as same.
DID number
Just leave it blank.
Extension
It's unavailable for Analog trunk, leave it blank.
Inbound Trunk Selection
Select the trunks for which this inbound route apply.
Time
Select appropriate time intervals for when this inbound route apply.
Path
Set the destination for incoming calls.

6. Inbound Call Control

29 ATCOM TECHNOLOGY CO., LIMITED