Cadillac 2014 ATS Owner's Manual page 303

Hide thumbs Also See for 2014 Cadillac ATS:
Table of Contents

Advertisement

Heater and radiator hoses, and
other engine parts, can be very
hot. Do not touch them. If you do,
you can be burned.
Do not run the engine if there is a
leak. If you run the engine, it
could lose all coolant. That could
cause an engine fire, and you
could be burned. Get any leak
fixed before you drive the vehicle.
Using coolant other than
®
DEX-COOL
can cause
premature engine, heater core,
or radiator corrosion. In addition,
the engine coolant could require
changing sooner. Any repairs
would not be covered by the
(Continued)
vehicle warranty. Always use
DEX-COOL (silicate-free) coolant
in the vehicle.
The cooling system in the vehicle is
filled with DEX-COOL engine
coolant. See
and
.
The following explains the cooling
system and how to check and add
coolant when it is low. If there is a
problem with engine overheating,
see
.
Adding only plain water or some
other liquid to the cooling system
can be dangerous. Plain water
and other liquids, can boil before
the proper coolant mixture will.
The coolant warning system is set
for the proper coolant mixture.
With plain water or the wrong
mixture, the engine could get too
hot but you would not get the
overheat warning. The engine
could catch fire and you or
others could be burned. Use a
50/50 mixture of clean, drinkable
water and DEX-COOL coolant.
Use a 50/50 mixture of clean
drinkable water and DEX-COOL
coolant. This mixture:
Gives freezing protection down
to 37°C ( 34°F), outside
temperature.

Advertisement

Table of Contents
loading

Table of Contents