Cadillac 2014 ATS Owner's Manual page 252

Hide thumbs Also See for 2014 Cadillac ATS:
Table of Contents

Advertisement

9-38
Driving and Operating
If equipped with a manual
transmission, the cruise control will
remain active when the gears are
shifted. The cruise is deactivated if
the clutch is depressed for several
seconds.
®
If the StabiliTrak
system begins to
limit wheel spin while using cruise
control, the cruise control
automatically disengages. See
. If a collision
alert occurs when cruise control is
activated, cruise control is
disengaged. See
When road conditions allow the
cruise control to be safely used, you
can apply the cruise control again.
(On/Off): Press to turn the
system on and off. A white cruise
control indicator appears in the
.
instrument cluster when cruise is
turned on.
+RES (Resume/Accelerate):
Press the control up briefly to
resume to make the vehicle resume
to a previously set speed or press
and hold to accelerate. If cruise
control is already active, use to
increase vehicle speed. To increase
speed by 1 km/h (1 mph), press
+RES up to the first detent. To
increase speed to the next 5 km/h
(5 mph) mark on the speedometer,
press +RES up to the second
detent.
SET (Set/Coast): Press the
control down briefly to set the speed
and activate cruise control. If cruise
control is already active, use to
decrease vehicle speed. To
decrease speed by 1 km/h (1 mph),
press SET down to the first detent.
To decrease speed to the next
5 km/h (5 mph) mark on the
speedometer, press SET down to
the second detent.
(Cancel): Press to disengage
cruise control without erasing the
set speed from memory.
Setting Cruise Control
If the cruise button is on when not in
use, it could get bumped and go into
cruise when not desired. Keep the
cruise control button off when cruise
is not being used.
1. Press
.
2. Get up to the desired speed.

Advertisement

Table of Contents
loading

Table of Contents