Table of Contents
Advertisement
ou
.
n
-
AREA MODE : Determines whether to use the MD area selected in SENSITIVITY.
-
SEL POS : Determines which of the 4 vertices of each MD area is to be
used.
-
XPOS : Determines the coordinate of the horizontal axis for SEL POS.
-
YPOS : Determines the coordinate of the vertical axis for SEL POS.
-
FILL
SET : Fills in a selected MD area. The color of fi lling is sequentially
selected as brown, orange, blue, cyan, yellowish green, yellow,
magenta and red.
-
RETURN : Select this to save the MOTION DET menu settings and return
to the SPECIAL menu.
PRIVACY : Mask an area you want to hide on the screen,
When the SPECIAL menu screen is
displayed, press the Function Setup switch
so that the arrow indicates 'PRIVACY'.
Set up the mode using the Function
Setup switch.
-
AREA : You can select up to 12
PRIVACY areas.
-
MODE : Determines whether to use
the area selected.
-
MASK COLOR :
Determine area color. You can select
GREEN, RED, BLUE, BLACK, WHITE and GRAY.
-
MASK TONE : Adjust the brightness of MASK COLOR.
-
TOP/BOTTOM/LEFT/RIGHT : Adjust the size and position of the selected area.
-
RETURN : Select this to save the PRIVACY menu settings and return to
the SPECIAL menu.
DIS (Digital Image Stabilizer) :
This function mitigates any picture movement due to external factors such as wind.
As the DIS function uses the digital zoom the camera's resolution will decrease.
DIS doesn't operate when background illumination is too low.
DIS doesn't operate when object pattern is monotonic as like sky or white wall.
If DIS is enabled, the digital zoom is not confi gured to less than X1.2 level.
PRIVACY AREA SETUP
1.AREA
AREA1
2.MODE
OFF
3.MASK COLOR
GREEN
4.MASK TONE
IIIIIIIIIIIIIIIIIIIII
5.TOP
II IIIIIIIIIIIIIIIIIII
6.BOTTOM
IIIII IIIIIIIIIIIIIIII
7.LEFT
IIIIIIIIIIIIIIIIIIIII
8.RIGHT
III IIIIIIIIIIIIIIIIII
9.RETURN
English_29
1
39
79
13
52
Advertisement
Table of Contents
