Removing The Registration Roller - Canon ImageRunner 600 Service Manual

3.

Removing the Registration Roller

1) Remove the front cover of the fixing feed-
ing unit.
2) Remove the transfer separation charging
assembly.
3) Remove the registration brake clutch.
4) Remove the E-ring [1], and detach the
clutch drive gear [2].
Caution:
When removing the drive gear, take care
not to drop the pin.
5) Remove the spring [3], E-ring [4], and
bushing [5] at the front.
COPYRIGHT © 1999 CANON INC. CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
CHAPTER 7 PICK-UP/FEEDING SYSTEM
[2]
Figure 7-D803
[4]
Figure 7-D804
[1]
[5]
[3]
7-71