InSinkErator Indulge Modern F-H3300 Specifications

The Next
Necessity
Dimensions
5-1/4"
Minimum 2-1/2" required
from sink hole center
to backsplash
9-1/4"
5-1/2"
Water
Supply
Inlet Tube
Flexible
Outlet Tube
Flexible
Vent Tube
1/4" Incoming
Water Supply
8-3/4"
11"
NOTE: Max counter thickness is 3".
3-3/4"
6-3/4"
6-1/8"
Job Specifications
HWD359-11F-45-02
Instant Hot Water Dispensers
F-H3300
Our finest line of instant hot water dispensers
™ for use with our Stainless Steel Tank for filtered
near-boiling 200°F water
Tank and filter sold separately (SST-FLTR)
Submittal Sheet
• Hot Only – Dispenses near-boiling
200°F water
• Unique single handle design provides a
sleek, minimalist look
• OptiPush hot side activation with
™
automatic shut off
• Activate the faucet handle by first pressing
down and then pushing backward
• Ceramic valve resists corrosion
• Durable all brass faucet construction
• 5-Year We Come To You
Service Warranty*
• For use with InSinkErator Stainless Steel
Tank and F-201 Filtration System
• Available in these designer finishes:
chrome and satin nickel
Sample Specification
Instant hot water dispenser(s) shall be
InSinkErator Model F-H3300 with
2/3-gallon stainless steel tank, adjustable
temperature from 160°F to 210°F and
instant, self-closing ceramic hot valve.
Warranty:
5-year parts and in-home service.
* The complete InSinkErator warranty is included in the Care & Use
booklet packed with each unit.
Complies with Lead Plumbing Law
1-800-558-5700
www.insinkerator.com
Printed in USA

Specifications

Ceramic Valve
Shipping Weight
Required
Hole Diameter
In-Home
®
InSinkErator may make improvements and/or
changes in the specifications at any time, in its sole
discretion, without notice or obligation and further
reserves the right to change or discontinue models.
Emerson Electric Co. All Rights Reserved.
Instant, self-closing
Approximately
5.0 lbs.
1 -3/8" – 1 -1/2"
standard sink hole
The Emerson logo is a trademark and
service mark of Emerson Electric Co.
© 2011 InSinkErator, a division of