InSinkErator Indulge Contemporary F-HC1100 Specifications

The Next
Necessity
Dimensions
5-1/4"
Minimum 2-5/8" required
from sink hole center
to backsplash
8-3/4"
Cold Side
5-1/2"
Water Supply
Hot Side
Water Supply
Inlet Tube
Flexible
Outlet Tube
Flexible
Vent Tube
1/4" Incoming
Water Supply
8-3/4"
11"
NOTE: Max counter thickness is 3".
3-3/4"
6-3/4"
6-1/8"
HWD366-11K-45-02
Instant Hot Water Dispensers
F-HC1100
Our finest line of instant hot water dispensers
™ for use with our Stainless Steel Tank for filtered
near-boiling 200°F and cool drinking water
Tank and filter sold separately (SST-FLTR)
Submittal Sheet
• Hot & Cool – Dispenses near-boiling
200°F water and cool drinking water
• Graceful high-arching spout swivels for
greater convenience and stylish integrated
levers provides a dramatic look
• Hot lever automatically shuts off, while
Stay-On ™ cool lever remains on for easy use
• Durable all brass faucet construction
• 5-Year We Come To You
Service Warranty*
• For use with InSinkErator Stainless Steel
Tank and F-201 Filtration System
• Available in these designer finishes:
white, biscuit, French gold, satin nickel,
polished nickel, chrome, brushed chrome,
mocha bronze, oil rubbed bronze, matte
black and gloss black
Sample Specification
Instant hot water dispenser(s) shall be
InSinkErator Model F-HC1100 with 2/3-gallon
stainless steel tank, adjustable temperature
from 160°F to 210°F and instant, self-closing
hot valve.
Warranty:
5-year parts and in-home service.
* The complete InSinkErator warranty is included in the Care & Use
booklet packed with each unit.
Complies with Lead Plumbing Law
1-800-558-5700
www.insinkerator.com
Printed in USA

Specifications

Hot Valve
Cold Valve
Shipping Weight
Required
Hole Diameter
® In-Home
InSinkErator may make improvements and/or
changes in the specifications at any time, in its sole
discretion, without notice or obligation and further
reserves the right to change or discontinue models.
Emerson Electric Co. All Rights Reserved.
Instant, self-closing
Manual return
Approximately
4.0 lbs.
1 -3/8" – 1 -1/2"
standard sink hole
The Emerson logo is a trademark and
service mark of Emerson Electric Co.
© 2011 InSinkErator, a division of