Recording Images In The Alarm Recording; Area; Alarm Recording - Sanyo DSR-3016P Instruction Manual

RECORDING IMAGES IN THE ALARM
RECORDING AREA

Alarm recording

1
1
Setting the time
Press the MENU button to display the LANGUAGE/CLOCK SET
menu, and set the date and time. After the setting has been made,
press the EXIT/OSD button, the date and time appear in the
operating display. (See page 44.)
MENU
2
Set alarm recording.
Press the MENU button to display the ALARM REC MODE
SET menu in the menu screen. Then change the ALARM
RECORDING setting to the desired alarm recording setting
(ENABLED, AL-REC ON TIMER, AL-REC OFF TIMER or OLY
AL-RC ON TMR) and change the ALARM TRIGGER setting.
(See page 59.)
Press the EXIT/OSD button to return to the normal screen.
2
Suspicious person detection
When an alarm occurs, "ALARM" appears in the operating display,
the ALARM indicator flashes and alarm recording (REC symbol)
starts. Alarm images are recorded in the alarm recording area.
Furthermore, the number of alarms in the operating display is
increased by one each time an alarm occurs.
ALARM
Note: Normal recording and timer recording stop when an alarm
occurs during normal recording or timer recording.
<LANGUAGE/LANGUE/SPRACHE/IDIOMA>
ENGLISH
<CLOCK SET>
01-01-2002 TUE 00:00:00
<SUMMER TIME SET>
MODE : USE
WEEK MONTH TIME
ON LST-SUN 03 02:00
OFF LST-SUN 10 02:00
<EXT.CLOCK SET>
ADJUST.TIME 01:00
<ALARM REC MODE SET>
PICTURE QUALITY : SUPER FINE
AUDIO RECORDING : ON
ALARM RECORDING : ENABLED
ALARM INTERLEAVE : ONLY
PROGRAM GROUP : OFF
REC RATE: @ 0.1FPS, DURATION: 40SEC
PRE-ALARM RECORDING : ON
REC RATE:@ *** FPS, DURATION: ***
=> (01010 ALARMS CAN BE RECORDED )
ALARM TRIGGER : ALARM
01
REC ALARM 0001 REPEAT EN 10-05-02 18:10:25
The number of
alarms is counted.
3
Ending alarm recording
After the end of the alarm duration period (default setting: 5 sec),
the "REC" and "ALARM" displays stop flashing and recording
stops.
22
Alarm images are
recorded
English