Alarm Recording; Motion Sensor - Sanyo DSR-5016 Series Quick Operation Manual

DSR-5016 series Quick Operation Guide

• Alarm recording

Select one of the modes in the
following table.
Setting Description
Alarm recording is disabled.
OFF
Alarm recording is enabled regardless of
ENABLED
whether or not timer recording is enabled.
AL-REC ON Alarm recording is enabled only during
TIMER timer recording.
Alarm recording is enabled only when
AL-REC OFF
timer recording is disabled.
TIMER
Alarm recording is enabled only during the
OLY AL-RC
time set in the timer setting. Normal
ON TMR
recording is not enabled.
* "OLY AL-RC ON TMR" can be enabled simply by making
a timer setting. Accordingly, there is no need to press the
[TIMER] button.
Set the values for "PICTURE QUALITY",
"AUDIO RECORDING", etc.
P r e s s t h e [ E X I T / O S D ] b u t t o n . T h e s e t t i n g i s c o m p l e t e d a n d t h e d i s p l a y r e t u r n s t o t h e n o r m a l s c r e e n .
Within the OSD screen, use the jog dial to display sub-menus and move the cursor. Turn the shuttle ring
clockwise to select an entry. Turning it counterclockwise will bring up the previous screen.
Press the [MENU] button.
Select "2. RECORD SET".
Select "7. ALARM REC MODE SET"
• Pre-alarm recording
Select
"PRE-ALARM RECORDING".
Select ON or OFF.
Setting Description
Pre-alarm recording is disabled.
OFF
ON Pre-alarm recording is enabled.
When it is set to ON, proceed
to set "DURATION".
alarm signal
time
Pre-alarm recording Post-alarm recording
Up to 15 minutes
Alarm recording
<ALARM REC MODE SET>
ALARM RECORDING : OFF
PICTURE QUALITY : ENHANCED
PICTURE QUALITY ->
AUDIO RECORDING : OFF
ALARM INTERLEAVE : ONLY
REC RATE: 15FPS, DURATION: 20SEC
PRE-ALARM RECORDING : ***
REC RATE: **** FPS, DURATION: 1MIN
ALARM TRIGGER : ALARM

MOTION SENSOR

->
• Alarm trigger
Select "ALARM TRIGGER".
Select one of the modes in the
following table.
Setting Description
Alarm recording is performed when
ALARM
an external alarm*1 occurs.
Alarm recording is performed when
a motion sensor detects movement.
SENSOR
( P.99)
Alarm recording is performed when
ALARM AND both the external alarm*1 and a
SENSOR motion sensor are activated
simultaneously.
Alarm recording is performed when
ALARM OR
either the external alarm*1 or a
SENSOR
motion sensor is activated.
• Motion sensor
Select
"MOTION SENSOR".
The setting screen for the
sensor appears.
CH01 T-1 LEVEL : OFF MODE : A
For further details, refer
to the Instruction Man-
ual, pages 99 to 102.
6