Pioneer DV-545 Operating Instructions Manual page 51

To make a program of your favorite parts of a
disc as it plays – DVD-Video/Video CD/CD/MP3
With this player, it is possible to make a program as you
watch a DVD-Video or Video CD or while listening to an
MP3 or a CD .
To add a title/chapter/track to a program,
press and hold PROGRAM for about 2 seconds.
The current title/chapter/track number appears on-screen
together with the program step number. If there isn't
already a program then a new one will be created.
07 3 Program 03
Chapter
To confirm the contents of a program:
Press PROGRAM.
Notes
• When using this function to program DVD-Video discs, the
program being created corresponds to the Program screen
(chapter or title) that appears when PROGRAM is pressed.
Be sure to check that the appropriate program type is
selected.
• You cannot make a program containing chapters in
different titles.
To save a program in memory – DVD-Video
This player can memorize the programs on up to 24
DVD-Video discs. By turning the [Program Memory] to
[On], the player will save your program and recall it the
next time you use the same DVD-Video. When the
program memory exceeds 24, programs will be erased
in chronological order from the oldest program in
memory.
1
Move the Joystick down to highlight
[Program Memory] and move the Joystick
right to select [On].
Program Chapter Program Title
Title
Current:
1
Title
09 07 18
Program Memory
Move
2
Press ENTER.
The program is saved in memory.
Note
When a DVD-Video with a program stored in memory is
loaded, program playback may start automatically.
7 1
Chapter
(Chapter 1~18)
On
Off
Select Exit
ENTER PROGRAM
To erase a program saved in memory
– DVD-Video
The player erases programs in chronological order when
the maximum number of programs that can be held in
memory is exceeded. To prevent the player from erasing
older programs that you may still use regularly, or when
you don't want to use a program anymore, it is possible
to manually erase programs stored in memory.
1
Load a DVD-Video that has a program
stored in memory.
2
Press PROGRAM.
The program screen appears.
3
Move the Joystick down to highlight
[Program Memory] and move the Joystick
right or down to select [Off].
4
Press ENTER.
The program is cleared from memory.
49
En