Ford Expedition Owner's Manual page 146

Seating and Safety Restraints
To install a filter:
• First, position the filter in its
housing making sure that the far
forward end is all the way up in
the housing. Then push in on the
center of the outside edge of the
filter and rotate up into the
housing until it clips into position.
REAR SEATS
Second and third row head restraints
WARNING: To minimize the risk of neck injury in the event of a
crash, the driver and passenger occupants should not sit in
and/or operate the vehicle, until the head restraint is placed in its
proper position. The driver should never adjust the head restraint
while the vehicle is in motion.
Second row outboard seat head restraints – The outboard head
restraints are non adjustable, but they can be folded.
The non-adjustable head restraints
consist of:
• a trimmed energy absorbing foam
and structure (1),
• and a fold strap (2).
To fold the outboard head restraint, pull the fold strap. To place the
head restraint back to the upright position, pull up on the head restraint.
Second row center seat head restraint – The center rear head
restraint is fixed and non-adjustable. The head restraint consist of a
trimmed foam covering over the upper structure of the seatback.
146
2012 Expedition (exd)
Owners Guide, 1st Printing
USA (fus)