Trailer Brake Controller-Integrated - Ford F-150 Owner's Manual

268
Integrated Trailer Brake Controller (If Equipped)
WARNING: The Ford TBC has only been verified to be
compatible with trailers having electric-actuated drum brakes
(one to four axles) and some electic-over-hydrualic (EOH) brakes. It
will not activate hydraulic surge-style trailer brakes. It is the
responsibility of the customer to ensure that the trailer brakes are
adjusted appropriately, functioning normally and all electric connections
are properly made. Failure to do so may result in loss of vehicle
control, crash or serious injury.
When used properly, the TBC assists in smooth and effective trailer
braking by powering the trailer's electric or EOH brakes with a
proportional output based on the towing vehicle's brake pressure.
The TBC user interface consists of the following:
A. +/- (GAIN adjustment buttons): Pressing these buttons adjusts the
TBC's power output to the trailer brakes (in 0.5 increments). The GAIN
setting can be increased to a maximum of 10.0 or decreased to a
minimum of 0 (no trailer braking). Pressing and holding a button raises
or lowers the setting continuously. The GAIN setting displays in the
message center as follows: TBC GAIN = XX.X.
The controller is designed to display three items of information in the
information display. These are: GAIN setting, output bar graph, and
trailer connectivity status. They appear in the information display as
follows:
• TBC GAIN = XX.X NO TRAILER: Shows the current GAIN setting
during a given ignition cycle and when adjusting the GAIN. This also
displays during manual activation without a trailer connected or when
GAIN adjustments are made with no trailer connected.
2013 F-150 (f12)
Owners Guide gf, 1st Printing
USA (fus)
Towing
TRAILER BRAKE
A B